Fox Racing v1 Build Guide

VIDEO BUILD

Basic Kit Content

Fox Racing V1 Manual

1

Start by assemblying the perimeters spars

2

Assemble the lower motor bases

3

Place the arms in position  

3

Place the arms in position  

4

Plate the upper motor bases, then fix the motors

5

Start assemblying the 20×20 esc and fc on the main plate amd wire it

6

Mount the top plate with electronic on the arms

7

 Mount the standoff on the bottom plates with the m3x8mm bolts, then place below the frame

8

Once all electronic is wired, assembly the canopy  

9

Canopy: put the vtx antenna you prefer!!  

10

Canopy: install your RX Antenna 

Revolution Canopy ™

It’s required for this frame. You can decide to purchase it with the frame kit or to print it yourself. You will find the .stl files in TPU Parts section of the website.